| |
| |
|
|
| |
| |
We use the secure processing of PayPal
Very Important Disclaimer
See our guarentee, its a good one.
See our privacy policy, its even better.
2008 Internal Seal Basic Launch Pad - Accepts more 3 liter, 2 liter, 20 oz, and 16 oz soda bottles.
Accepts even the new soda bottles with short threads. Based on "Clark Cable" or
cable tie launch pad design invented by Ian Clark.
Comes with launch mechanism, tire valve stem, base, launch pull string, launch tube,
5 gaskets and carry sack. The basic launch pad can easily be upgraded to include a
pressure gauge, a water valve with garden hose connection, and an air hose connector.
Garden Hose Water Adapter - Add a garden hose fitting and valve to fill the rocket
on the pad. Convenient, fast, and partially pressurizes the rocket from water pressure.
Pressure Gauge - Add a pressure gauge to make science experiments more accurate.
Air Hose Connector - Add an Industrial or Automotive air hose connector making connections to your air compressor a snap.
|
| |
|
|
| |
| |
2007 End Seal Basic Launch Pad - Accepts most 3 liter, 2 liter, 20 oz, and 16 oz soda bottles.
Comes with launch mechanism, tire valve stem, base, launch pull string, launch tube,
5 gaskets and carry sack. The basic launch pad can easily be upgraded to include a
pressure gauge, a water valve with garden hose connection, and an air hose connector.
Garden Hose Water Adapter - Add a garden hose fitting and valve to fill the rocket
on the pad. Convenient, fast, and partially pressurizes the rocket from water pressure.
Pressure Gauge - Add a pressure gauge to make science experiments more accurate.
Air Hose Connector - Add an Industrial or Automotive air hose connector making connections to your air compressor a snap.
|
| |
|
|
| |
| |
If you are ordering a launch pad, use the form above to add pressure gauges and water fill adaptors.
If you are making your own pad or upgrading an existing pad, then use the forms below to purchase the parts seperately.
| |
Pressure Gauge Addon
All the parts necessary to add a pressure gauge to your launch pad using 1/2" PVC "T".
The gauge is 0-100 PSI and comes with a galvanized adaptor.
Parts come assembled and ready to add to your launch pad.
|
|
 |
|
|
| |
Water Fill Addon
All the parts necessary to add a water fill adaptor to your launch pad using 1/2" PVC fittings and valve.
The valve is a 1/4 turn PVC valve. The female end adaptor attaches to the male end of a garden hose. Gasket included. We reserve the right to substitute equivalent parts for the garden hose connector depending on availability.
Parts come assembled and ready to add to your launch pad.
|
|
 |
|
|
| |
Soda Bottle Grabbers
Molded parts ready to grab your soda bottle necks. Made with 14 gauge copper wire and lead free plumbing solder.
The pig-tails are approximately 10 to 14 inches long. The molded ends fit neatly inside a 1 1/4" slip to slip
PVC coupler.
Parts come in pairs.
|
|
 |
|
|
| |
Industrial Air Hose Connector Addon
Off the shelf parts for Industrial air compressor hose attachment. This will make hookups a snap.
Parts come assembled and ready to add to your launch pad.
|
|
 |
|
|
| |
Automotive Air Hose Connector Addon
Off the shelf parts for Automotive air compressor hose attachment. This will make hookups a snap.
Parts come assembled and ready to add to your launch pad.
|
|
 |
|
|
| |
T-Shirt
Handsome shirt to wear out to water rocket derby!
|
|
|
|
|
| |
Inner O-Ring Seals
We've ordered thousands of these so you don't have to. Sold in sets of 20 (twenty).
1/8" Dia. x 5/8" ID
|
|
|
|
|
| |
|
|
|
|
|
|
